| top design | aluminum rail 28-38 mm top rail |
| size | 80*250 100*250 120*250 match many kinds of window |
| fabric desingn | blackout daylight design |
| MOQ | 10PCS for normally size |
| Packing | carton with pp bag or pet box |
| Sample | One pcs for free |
An adjustable roller shade hangs from a slim aluminium top rail, wraps around the tube behind it and stays at whatever height you set with the side chain. The fabric is held taut on the tube rather than gathered into a stack, so the blind sits close to the glass and leaves the sill and the floor line clear.
We build these blackout window roller blinds in white, grey, black and beige as standard, with a custom colour when a room scheme needs an exact match. Two fabric designs are available: a blackout build for full darkening, and a daylight build for rooms that should stay bright but lose their glare. Standard sizes cover most domestic windows; anything outside them is made to your own width and drop.
As a window blinds supplier, we run this model for both single-room orders and multi-window projects, so the rail profile, chain hardware and fabric quality stay the same whether you are dressing one bedroom or a whole floor of apartments.
The fitted depth is shallow enough to work inside a normal recess, and the flat panel of colour reads as part of the wall rather than an added layer of furnishing. For hotels, show homes and rental units that consistency is the point: the same blind can be repeated across rooms without any of them looking like a compromise.
The control is a beaded chain that runs down one side of the shade and loops back to the tube. Pulling the front run lifts the blind; pulling the back run lowers it. Because the chain moves in steps rather than running free, the shade holds exactly where you leave it — half down over a desk, fully down at night — without drifting and without a second hand steadying the bottom bar.
The chain is metal or ABS and runs on a clutch that keeps the glide even. There is no squeak, no jitter and no sudden drop at the end of the travel, which is what keeps window roller blinds feeling the same in their third year as in their first week.
Chain length is matched to the drop when the blind is made, so on tall windows and doors the loop still hangs at a comfortable height instead of somewhere near the floor. On a low window the loop is shortened so it cannot snag on a sill or a radiator.
If the loop is the wrong length for the room or the chain ever needs re-tensioning, that is a fitting adjustment rather than a replacement. Tell us the drop you are covering when you order and we will set it for that measurement.
Dust settles on the face of a blind rather than working into it, so the panel can be kept presentable with a soft brush attachment on a vacuum or a wipe with a wrung-out cloth. There is no need to take the blind down, soak it or send it away for cleaning.
The fabric is built to resist fading, dust and everyday wear, which matters most on a south- or west-facing window where a thinner panel would fade far sooner. It is also a waterproof fabric, so kitchen splashes, bathroom humidity and condensation near a shower wipe off instead of marking the surface.
Stay away from abrasive creams, scouring pads and solvent cleaners; mild soap and water on a damp cloth is all the fabric needs. Creases picked up in packing usually relax once the blind has hung for a few days at room temperature.
The mechanism asks about as little. A light dusting along the top rail and an occasional check that the chain runs cleanly covers it. In rentals and serviced apartments this short routine is often the reason the same blind still looks presentable after several changeovers, which is why window roller blinds in a blackout build are so widely specified for that kind of property.
Close the shade and the room is private in both directions: no silhouettes at night with the lights on, no view in from the street during the day. That matters on ground-floor rooms, bathrooms and any window facing a neighbouring building.
The same panel works as a thermal layer. Fabric sitting close to the glass slows heat transfer, so a sun-facing room stays cooler through the afternoon and a cold room holds its warmth better after dark. Over a season that usually shows up as less run time on air conditioning and heating rather than as one dramatic saving.
Where the blind is fitted changes how much of this you feel. An inside mount puts the fabric right against the glass and gives the neatest result; an outside mount overlaps the frame and seals the edges better. Neither is wrong — choose according to whether you want the recess left clear or the light gaps closed.
These blackout shades are a comfort and privacy measure rather than a substitute for glazing or wall insulation. Used on the hottest and coldest windows in a building, though, they are a simple first layer of climate control that costs nothing to operate beyond the pull of a chain.
Stocked sizes cover most bedroom, study and living-room windows. Anything else — a narrow bathroom window, a wide slider, an awkward opening in an older building — is made to the finished size you give us, so the panel covers the glass without a generous overlap on one side and a gap on the other.
Measure the width and the drop you want the fabric to cover, then tell us whether the blind will sit inside the recess or over the frame; the two mounts need different figures. On a recess, measure at more than one point and use the narrowest reading, because older openings are rarely square. On an outside mount, decide how far past the frame you want the fabric to sit before you send the numbers.
Colour is a straightforward choice: white, grey, black and beige from stock, or a custom colour matched to paint, joinery or a fabric sample. Send the physical sample if you have one — matching to a swatch is far more reliable than matching to a photograph on a screen.
Fabric design is the other decision. The blackout build suits bedrooms, hotel rooms and media spaces; the daylight build suits rooms that should stay bright. On projects we cut a custom roller blinds order from the same fabric batch wherever the schedule allows, so the blinds for windows across one floor do not arrive a shade apart.
| Product type | Chain-operated blackout roller shade |
| Top rail | Aluminium, 28–38 mm |
| Fabric build | Woven jacquard face over blackout and UV layers with a foam backing |
| Fabric designs | Blackout or daylight |
| Standard sizes (W × H) | 80 × 250 cm, 100 × 250 cm, 120 × 250 cm |
| Custom sizing | Any width and drop made to your measurement |
| Colours | White, grey, black, beige; custom colour on request |
| Control | Beaded chain, metal or ABS |
| Mounting | Inside the recess, or outside on frame or ceiling |
| Packing | carton with pp bag or pet box |
| Order quantity | Confirmed per order and per size |
| Sample | One pcs for free |
The shade is built from a high-density, light-impermeable fabric, often with a blackout lining added, so it blocks up to 99% of outside light. Glare disappears, furniture is shielded from UV damage, and the room turns genuinely dark — the kind of setting bedrooms, home theaters, and home offices need for undisturbed rest or focused work.
Meijia Window Decoration has been manufacturing window coverings since 2005 and today runs a 53,000 m² factory with around 200 staff, plus a second production base in Anhui with 12 lines, backed by a database of more than 3,000 qualified suppliers. We supply builders, e-commerce sellers and supermarkets across Europe, North and South America, the Middle East and Asia, with OEM and private-label production, minor customisation and one-stop export handling under 100% quality control. Both plants hold BSCI social responsibility, ISO 9001 and ISO 14001 certification.
Close to it, and how close depends on the mount. The fabric is a full blackout construction, so no daylight passes through the panel itself. With an inside mount a thin line of light can creep around the edges where the fabric meets the recess — normal for any recess-fitted blind, and usually not enough to wake you. If you want the edges closed as well, choose an outside mount so the panel overlaps the frame on each side.
Yes. Standard sizes are stocked, and any other width or drop is produced to your measurement, which is where most custom roller blinds orders begin. Send the finished width and drop you want the fabric to cover, plus whether the blind sits inside the recess or over the frame — the two mounts are measured differently and a size taken for one will not fit the other.
The blackout build has a light-blocking layer bonded behind the jacquard face, so it darkens the room and screens UV at the same time. The daylight build keeps the panel bright and softens glare without blacking the room out. In practice, roller blinds blackout fabric is specified for bedrooms and hotel rooms, while the daylight fabric tends to go into living rooms, studies and hallways.
Most customers do. Brackets, fixings and the chain arrive with the blind, and the same set works for an inside recess fit or an outside mount on the frame or ceiling. Mark the bracket positions level, fix them, click the tube into place, then run the blind through its full travel before tightening everything. Fitting window roller blinds of a wide size is easier with a second person holding the tube while you mark.
Vacuum the face with a soft brush attachment, or wipe it with a cloth wrung out in mild soapy water. The face is waterproof, so kitchen and bathroom splashes wipe off rather than soaking in. Blackout shades with a foam backing should never be soaked or machine washed, and scouring pads, solvent cleaners and abrasive creams should stay away from the panel.
The chain carries a breakaway connector, so if it is pulled hard or caught it separates instead of holding the load. It clicks back together afterwards. Set the blind so the loop hangs free and out of reach of cots, play mats and pet beds, and check the connector as part of the same routine as cleaning.
White, grey, black and beige are produced as standard, and a custom colour can be matched when a room scheme or a project specification calls for it. As a window blinds supplier, we keep the stock colours on regular production, which is why a repeat order placed months later still matches. If you are matching paint or joinery, send a physical sample rather than a screen image.